TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 218 of 856
REMOVAL 1. Attach beam-type sling (Figure 1, Item 1) to lifting brackets (Figure 1, Item 2) and support engine with lifting device. 2. Remove two screws (Figure 1, Item 16), two nuts (Figure 1, Item 10), two lockwashers (Figure 1, Item 11), and four flat washers (Figure 1, Item 12) connecting trunnion assembly (Figure 1, Item 15) to forward container support (Figure 1, Item 14). Store screws, washers, and nuts in mailbag (Figure 1, Item 9) in lower half of container (Figure 1, Item 13). Discard lockwashers. 3. Remove four screws (Figure 1, Item 8), four nuts (Figure 1, Item 4), four lockwashers (Figure 1, Item 5), and four flat washers (Figure 1, Item 6) connecting rear support (Figure 1, Item 7) to two container mounting brackets (Figure 1, Item 3). Discard lockwashers. WARNING Never crawl under equipment when performing maintenance unless equipment is securely blocked. Keep clear of equipment when it is being raised or lowered. Do not allow heavy components to swing while suspended by lifting device. Exercise caution when working near a cable or a chain under tension as equipment may drop or shift. Failure to comply may result in injury to personnel. 4. Remove engine from lower half of container (Figure 1, Item 13). 16 12 4 5 6 1 9 14 15 13 12 11 10 8 3 7 2 MAINT_088 Figure 1. Engine Removal from Lower Half of Container. TM 9-2815-205-24 0033 0033-2