TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 208 of 856
DISASSEMBLY 1. Fuel primary filter assembly (strainer). a. If necessary, remove three plugs (Figure 1, Item 20) from strainer head (Figure 1, Item 17). b. Remove drain cock (Figure 1, Item 13) from shell assembly (Figure 1, Item 14). NOTE Do not remove the element seat, spring, seal, and spring seat from the strainer shell assembly. Service these parts as an assembly. The small gasket and large gasket are included with the filter element. c. Remove bolt (Figure 1, Item 19), small gasket (Figure 1, Item 18), filter element (Figure 1, Item 15), large gasket (Figure 1, Item 16), and shell assembly (Figure 1, Item 14) from strainer head (Figure 1, Item 17). Discard gaskets and filter element. 2. Fuel secondary filter assembly (filter). a. Remove drain cock (Figure 1, Item 12) from filter body (Figure 1, Item 11). b. Remove bolt (Figure 1, Item 1), small gasket (Figure 1, Item 2), filter body (Figure 1, Item 11), filter element (Figure 1, Item 5), and large gasket (Figure 1, Item 4) from filter head (Figure 1, Item 3). Discard filter element and gaskets. c. Remove retaining ring (Figure 1, Item 6), seat (Figure 1, Item 7), gasket (Figure 1, Item 8), spring seat (Figure 1, Item 9), and spring (Figure 1, Item 10) from filter body (Figure 1, Item 11). Discard gasket and retaining ring. MAINT_083 14 15 16 17 18 19 20 20 20 13 1 2 3 4 5 6 7 8 9 10 11 12 FUEL FILTER FUEL FILTER FUEL STRAINER FUEL FILTER Figure 1. Fuel Filter Assembly, Disassembly/Assembly. END OF TASK TM 9-2815-205-24 0031 0031-2