TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 201 of 856
CLEANING WARNING Cleaning solvent is TOXIC and flammable. Wear protective goggles and gloves; use only in a well-ventilated area; avoid contact with skin, eyes, and clothes; and do not breathe vapors. Keep away from heat or flame. Never smoke when using cleaning solvent. Failure to comply may result in injury, illness, or death to personnel. 1. Clean drain receptacle, bracket, and filter element with dry cleaning solvent and dry with compressed air. 2. Remove obstructions in hose using compressed air. END OF TASK INSPECTION-ACCEPTANCE AND REJECTION CRITERIA Check drain receptacle, retainer, and bracket for cracks or broken parts. END OF TASK ASSEMBLY 1. If removed, install two loop clamps (Figure 1, Item 3) and hose clamp (Figure 1, Item 1) on hose (Figure 1, Item 2). 2. Install machine screw (Figure 1, Item 4), lower loop clamp (Figure 1, Item 3), and nut (Figure 1, Item 8) on bracket (Figure 1, Item 9). 3. Install drain receptacle (Figure 1, Item 6), filter element (Figure 1, Item 5), retainer (Figure 1, Item 7), two flat washers (Figure 1, Item 10), and two wing nuts (Figure 1, Item 11) on bracket (Figure 1, Item 9). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0029 0029-3/blank