TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 195 of 856
REMOVAL - Continued 10. Remove adaptor (Figure 2, Item 24), two copper flat washers (Figure 2, Item 23), and lower tube assembly (Figure 2, Item 18) from cylinder block. If necessary, remove clip (Figure 2, Item 19) from tube assembly.Discard flat washers. 12 13 14 15 14 16 17 18 19 20 21 22 18 23 24 25 MAINT_079 Figure 2. Air Box Drains Removal/Installation. END OF TASK INSTALLATION 1. Loosely install lower tube assembly (Figure 2, Item 18), adaptor (Figure 2, Item 24), and two new copper flat washers (Figure 2, Item 23) on right side of cylinder block. 2. Coat threads on elbow (Figure 2, Item 25) with sealing compound and install elbow into cylinder block with port facing toward front of engine. 3. Install elbow (Figure 2, Item 16) in top of check valve (Figure 2, Item 17) and tighten securely. 4. Loosely connect lower tube assembly (Figure 2, Item 18) to bottom of check valve (Figure 2, Item 17). If removed, install clip (Figure 2, Item 19) on lower tube assembly (Figure 2, Item 18). 5. Loosely install upper tube assembly (Figure 2, Item 14) in elbow (Figure 2, Item 25) and elbow (Figure 2, Item 16) in check valve (Figure 2, Item 17). If removed, install clip (Figure 2, Item 15) on upper tube assembly (Figure 2, Item 14). 6. Install new lockwasher (Figure 2, Item 13) and bolt (Figure 2, Item 12) through clip (Figure 2, Item 15) into cylinder block. 7. For model 5063-5392, install spacer (Figure 2, Item 22), new lockwasher (Figure 2, Item 20), and bolt (Figure 2, Item 21) through clip (Figure 2, Item 19) into cylinder block. TM 9-2815-205-24 0028 0028-3