TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 194 of 856
REMOVAL 1. Remove upper hose assembly (Figure 1, Item 2) from elbow (Figure 1, Item 1), in check valve (Figure 1, Item 11), and brass elbow (Figure 1, Item 3) on rear left cylinder block. 2. Remove lower hose assembly (Figure 1, Item 5) from check valve (Figure 1, Item 11) and elbow (Figure 1, Item 4) on rear left oil pan. 3. If oil cooler has not been removed, remove screw (Figure 1, Item 7), lockwasher (Figure 1, Item 8), and flat washer (Figure 1, Item 9) from clip (Figure 1, Item 6) on oil cooler (Figure 1, Item 10). Discard lockwasher. 4. Remove elbow (Figure 1, Item 1) from check valve (Figure 1, Item 11), brass elbow (Figure 1, Item 3) from left side of cylinder block, and elbow (Figure 1, Item 4) from left side of oil pan. If necessary, remove clip (Figure 1, Item 6) from check valve (Figure 1, Item 11). 2 1 3 4 5 6 7 8 9 10 11 MAINT_078 Figure 1. Air Box Drains Removal. 5. Remove bolt (Figure 2, Item 12) and lockwasher (Figure 2, Item 13) from clip (Figure 2, Item 15) on upper tube assembly (Figure 2, Item 14). Discard lockwasher. 6. Remove upper tube assembly (Figure 2, Item 14) from elbow (Figure 2, Item 16), in check valve (Figure 2, Item 17), and elbow (Figure 2, Item 25) in rear right cylinder block. If necessary, remove clip (Figure 2, Item 15) from tube assembly. 7. Disconnect lower tube assembly (Figure 2, Item 18) from check valve (Figure 2, Item 17). Remove check valve. 8. Remove elbow (Figure 2, Item 16) from check valve (Figure 2, Item 17) and elbow (Figure 2, Item 25) from cylinder block. 9. For model 5063-5392, remove bolt (Figure 2, Item 21), lockwasher (Figure 2, Item 20), and spacer (Figure 2, Item 22) from clip (Figure 2, Item 19) on lower tube assembly (Figure 2, Item 18). Discard lockwasher. TM 9-2815-205-24 0028 0028-2