TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 185 of 856
INSTALLATION 1. Connect hose assembly (Figure 1, Item 1) to connector (Figure 1, Item 2) in top of turbocharger (Figure 1, Item 3). Tighten securely. 2. Connect hose assembly (Figure 1, Item 1) to oil filter adaptor (Figure 1, Item 6). Refer to (WP 0018) for model 5063-5392 or (WP 0019) for models 5063-5393 and 5063-539L. 3. Remove screw (Figure 1, Item 5) and lockwasher (Figure 1, Item 4) from plate (Figure 1, Item 8) at rear of left cylinder head and install screw (Figure 1, Item 5) and new lockwasher (Figure 1, Item 4) in clip (Figure 1, Item 7) and plate (Figure 1, Item 8). Torque screw to 30–35 lb-ft (41–47 N·m). 4. For model 5063-5392: If removed, install clip (Figure 1, Item 13) on hose assembly (Figure 1, Item 1). Install screw (Figure 1, Item 12), flat washer (Figure 1, Item 16), new lockwasher (Figure 1, Item 15), and nut (Figure 1, Item 14) in clip on hose assembly and in bracket (Figure 1, Item 17) on air inlet housing. Torque screw to 30–35 lb-ft (41–47 N·m). 5. For models 5063-5393 and 5063-539L: If removed, install clip (Figure 1, Item 9) on hose assembly (Figure 1, Item 1). Remove screw (Figure 1, Item 11) and new lockwasher (Figure 1, Item 10) located at left side of flywheel housing. Install screw (in clip on hose assembly) and new lockwasher on flywheel housing. Torque screw to 30–35 lb-ft (41–47 N·m). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0025 0025-3/blank