TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 179 of 856
INSTALLATION 1. Install lower small bolt (Figure 3, Item 24) through clip (Figure 3, Item 46) on air box drain tube. 2. Install end bracket (Figure 3, Item 28), two flat washers (Figure 3, Item 22), two new lockwashers (Figure 3, Item 23), two small bolts (Figure 3, Item 24), flat washer (Figure 3, Item 27), new lockwasher (Figure 3, Item 26), and large screw (Figure 3, Item 25) on side of cylinder block. Torque two bolts (Figure 3, Item 24) to 13–17 lb-ft (18–23 N·m) and torque screw (Figure 3, Item 25) to 30–35 lb-ft (41–47 N·m). 3. Install two screws (Figure 3, Item 42), four flat washers (Figure 3, Item 40), end bracket (Figure 3, Item 41), two new lockwashers (Figure 3, Item 39), and two nuts (Figure 3, Item 38) on engine flywheel housing. Torque screws to 240–250 lb-ft (326–340 N·m). 4. Install four screws (Figure 3, Item 29), center mounting bracket (Figure 3, Item 37), four flat washers (Figure 3, Item 44), and four new locknuts (Figure 3, Item 43) on end bracket (Figure 3, Item 28) and end bracket (Figure 3, Item 41). Torque screws to 30–35 lb-ft (41–47 N·m). 5. Install two screws (Figure 3, Item 47), pressure switch bracket (Figure 3, Item 21), fuel filter assembly (Figure 3, Item 8), four flat washers (Figure 3, Item 34), and two new locknuts (Figure 3, Item 33) on center mounting bracket (Figure 3, Item 37). Torque screws to 30–35 lb-ft (41–47 N·m). 6. Install two screws (Figure 3, Item 45), fuel strainer assembly (Figure 3, Item 11), four flat washers (Figure 3, Item 36), and two new locknuts (Figure 3, Item 35) on center mounting bracket (Figure 3, Item 37). Torque screws to 30–35 lb-ft (41–47 N·m). 7. If removed, install elbow (Figure 3, Item 6), elbow (Figure 3, Item 9), connector (Figure 3, Item 10), two tees (Figure 3, Item 31), transducer (Figure 3, Item 30), elbow (Figure 3, Item 2), and pipe plug (Figure 3, Item 32) on fuel filter assembly (Figure 3, Item 8) as shown. 8. If removed, install connector (Figure 3, Item 12) on fuel strainer assembly (Figure 3, Item 11). TM 9-2815-205-24 0024 0024-5