TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 178 of 856
REMOVAL - Continued 8. Remove two screws (Figure 3, Item 45), four flat washers (Figure 3, Item 36), two locknuts (Figure 3, Item 35), and fuel strainer assembly (Figure 3, Item 11) from center mounting bracket (Figure 3, Item 37). Discard locknuts. 9. Remove two screws (Figure 3, Item 47), four flat washers (Figure 3, Item 34), two locknuts (Figure 3, Item 33), fuel filter assembly (Figure 3, Item 8), and pressure switch bracket (Figure 3, Item 21) from center mounting bracket (Figure 3, Item 37). Discard locknuts. 10. Remove four screws (Figure 3, Item 29), four flat washers (Figure 3, Item 44), four locknuts (Figure 3, Item 43), and center bracket (Figure 3, Item 37) from end bracket (Figure 3, Item 28) and end bracket (Figure 3, Item 41). Discard locknuts. 11. Remove two screws (Figure 3, Item 42), four flat washers (Figure 3, Item 40), two lockwashers (Figure 3, Item 39), two nuts (Figure 3, Item 38), and end bracket (Figure 3, Item 41) from engine flywheel housing. Discard lockwashers. 12. Remove two small bolts (Figure 3, Item 24), two lockwashers (Figure 3, Item 23), two flat washers (Figure 3, Item 22), large screw (Figure 3, Item 25), lockwasher (Figure 3, Item 26), flat washer (Figure 3, Item 27), and end bracket (Figure 3, Item 28) from side of cylinder block. Discard lockwashers. 13. If necessary, remove connector (Figure 3, Item 12) from fuel strainer assembly (Figure 3, Item 11). 14. If necessary, remove elbow (Figure 3, Item 6), elbow (Figure 3, Item 2), elbow (Figure 3, Item 9), connector (Figure 3, Item 10), transducer (Figure 3, Item 30), two tees (Figure 3, Item 31), and pipe plug (Figure 3, Item 32) from fuel filter assembly (Figure 3, Item 8). 22 23 24 25 27 26 28 29 21 2 31 6 9 8 32 33 34 35 36 34 12 11 29 37 38 39 40 41 40 42 44 43 45 36 47 44 43 46 30 10 MAINT_072 Figure 3. Fuel Filter Assembly Mounting Bracket Removal/Installation. END OF TASK TM 9-2815-205-24 0024 0024-4