TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 165 of 856
REMOVAL - Continued 9. Remove two large screws (Figure 2, Item 26), two lockwashers (Figure 2, Item 25), two flat washers (Figure 2, Item 24), small bolt (Figure 2, Item 29), lockwasher (Figure 2, Item 28), flat washer (Figure 2, Item 27), oil cooler adaptor (Figure 2, Item 23), and gasket (Figure 2, Item 22) from cylinder block. Discard gasket and lockwashers. 10. If necessary, remove pipe plug (Figure 2, Item 34) from bottom of engine oil cooler housing (Figure 2, Item 33). 26 25 24 27 28 29 23 22 30 31 32 33 34 MAINT_064 Figure 2. Engine Oil Cooler Removal. END OF TASK CLEANING WARNING Use Tech Solv 340 only with adequate ventilation. Vapors in high concentrations are anesthetic and dangerous to life. Avoid prolonged or repeated contact with skin. Do not take internally. Failure to comply may result in injury, illness, or death to personnel. NOTE Do not clean an oil cooler if metal particles from engine or transmission have entered oil system. Instead, replace oil cooler. 1. Oil cooler element - Oil side - Pump Tech Solv 340 solution through oil cooler element (Figure 3, Item 31) to remove sludge. TM 9-2815-205-24 0022 0022-3