Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download

Page 153 of 856

REMOVAL - Continued WARNING Components of this engine are heavy and awkward to handle. Use correct lifting procedures, indicated lifting devices, and/or assistance from other personnel. Failure to comply may result in injury to personnel. 7. Remove oil cooler assembly (Figure 2, Item 12) and gasket (Figure 2, Item 18). Discard gasket. 8. Remove oil cooler element (Figure 2, Item 19) and gasket (Figure 2, Item 20) from oil cooler assembly (Figure 2, Item 12). Discard gasket. 9. Remove three long studs (Figure 2, Item 28) and short stud (Figure 2, Item 27) from cylinder block. 10. Remove two large screws (Figure 2, Item 23), two lockwashers (Figure 2, Item 22), two flat washers (Figure 2, Item 21), small bolt (Figure 2, Item 26), lockwasher (Figure 2, Item 25), flat washer (Figure 2, Item 24), oil cooler adaptor (Figure 2, Item 29), and gasket (Figure 2, Item 30) from cylinder block. Discard gasket and lockwashers. 18 19 20 12 23 22 21 24 25 26 27 28 29 30 MAINT_057A Figure 2. Engine/Transmission Oil Cooler Removal. END OF TASK TM 9-2815-205-24 0021 0021-3