TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 135 of 856
FIELD MAINTENANCE OIL FILTER ASSEMBLY AND ADAPTOR REPLACEMENT (MODELS 5063-5393, 5063-539L) INITIAL SETUP: Tools and Special Tools Tool Kit, General Mechanic's (WP 0104, Table 1, Item 113) Wrench, Oil Filter (WP 0104, Table 1, Item 118) Wrench, Torque, Dial, 0–175 Lb-Ft (WP 0104, Table 1, Item 120) Materials/Parts Cleaning Solvent (WP 0103, Table 1, Item 8) Materials/Parts (cont.) Filter Element, Fluid (WP 0105, Table 1, Item 163) Gasket (WP 0105, Table 1, Item 34) Oil, Engine SAE 15/40 (WP 0103, Table 1, Item 27) Washer, Lock Qty: (4) (WP 0105, Table 1, Item 23) REMOVAL 1. Disconnect turbocharger oil supply hose (Figure 1, Item 1) from elbow (Figure 1, Item 8) in oil filter and adaptor assembly (Figure 1, Item 3). 2. If necessary, remove elbow (Figure 1, Item 8) from oil filter and adaptor assembly (Figure 1, Item 3). 3. Remove two short screws (Figure 1, Item 5), two long screws (Figure 1, Item 4), four lockwashers (Figure 1, Item 6), four flat washers (Figure 1, Item 7), gasket (Figure 1, Item 2), and oil filter and adaptor assembly (Figure 1, Item 3) from rear left side of cylinder block. Discard lockwashers and gasket. 1 8 2 3 4 5 6 7 6 7 MAINT_046 Figure 1. Oil Filter Assembly Removal. END OF TASK TM 9-2815-205-24 0019 0019-1