TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 133 of 856
INSTALLATION 1. If removed, install elbow (Figure 1, Item 17) on adaptor (Figure 1, Item 14). 2. Install new gasket (Figure 1, Item 10), oil filter adaptor (Figure 1, Item 14), four flat washers (Figure 1, Item 11), four new lockwashers (Figure 1, Item 12), two short screws (Figure 1, Item 16), and two long screws (Figure 1, Item 13) to left side rear of cylinder block. Torque screws to 30–35 lb-ft (41–47 N·m). 3. If removed, install two elbows (Figure 1, Item 15) in oil filter adaptor (Figure 1, Item 14). 4. Install four screws (Figure 1, Item 5), four flat washers (Figure 1, Item 4), oil filter assembly (Figure 1, Item 8), four new lockwashers (Figure 1, Item 2), and four nuts (Figure 1, Item 1) on bracket (Figure 1, Item 3). Torque screws to 30–35 lb-ft (41–47 N·m). 5. Connect two hose assemblies (Figure 1, Item 9) to two elbows (Figure 1, Item 15) in oil filter adaptor (Figure 1, Item 14) and to two elbows (Figure 1, Item 6) in oil filter head (Figure 1, Item 7). Tighten connections securely. 6. Connect turbocharger oil supply hose (Figure 1, Item 18) to elbow (Figure 1, Item 17) on top of oil filter adaptor (Figure 1, Item 14). Tighten hose connection securely. END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0018 0018-3/blank