TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download

Page 132 of 856

REMOVAL 1. Disconnect two hose assemblies (Figure 1, Item 9) from two elbows (Figure 1, Item 6) on oil filter head (Figure 1, Item 7). Remove two hose assemblies (Figure 1, Item 9) from two elbows (Figure 1, Item 15) on oil filter adaptor (Figure 1, Item 14). 2. Remove four screws (Figure 1, Item 5), four flat washers (Figure 1, Item 4), four lockwashers (Figure 1, Item 2), four nuts (Figure 1, Item 1), and oil filter assembly (Figure 1, Item 8) from bracket (Figure 1, Item 3). Discard lockwashers. 3. Disconnect turbocharger oil supply hose (Figure 1, Item 18) from elbow (Figure 1, Item 17) on top of oil filter adaptor (Figure 1, Item 14). 4. If necessary, remove two elbows (Figure 1, Item 15) from oil filter adaptor (Figure 1, Item 14). 5. Remove two short screws (Figure 1, Item 16), two long screws (Figure 1, Item 13), four lockwashers (Figure 1, Item 12), and four flat washers (Figure 1, Item 11) from oil filter adaptor (Figure 1, Item 14) on rear left side of cylinder block. Discard lockwashers. 6. Remove oil filter adaptor (Figure 1, Item 14) and gasket (Figure 1, Item 10) by tapping with a soft head hammer to break seal. If necessary, remove elbow (Figure 1, Item 17) from adaptor (Figure 1, Item 14). Discard gasket. 1 2 3 4 5 6 15 7 8 9 11 10 12 13 14 11 17 18 12 16 MAINT_045 Figure 1. Oil Filter Assembly and Adaptor Removal/Installation. END OF TASK TM 9-2815-205-24 0018 0018-2