TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 130 of 856
REMOVAL 1. Remove four screws (Figure 1, Item 4), four lockwashers (Figure 1, Item 5), and four flat washers (Figure 1, Item 6) from oil filter adaptor (Figure 1, Item 7) on rear left cylinder block. Discard lockwashers. 2. Using a soft head hammer, tap the oil filter adaptor (Figure 1, Item 7) and remove adaptor and gasket (Figure 1, Item 1). Discard gasket. 3. If engine is out of container, remove bolt (Figure 1, Item 3) and flat washer (Figure 1, Item 2) from flywheel housing. 1 2 3 7 4 5 6 MAINT_044 Figure 1. Oil Filter Adaptor Removal and Installation. END OF TASK INSTALLATION 1. If engine is out of container, install bolt (Figure 1, Item 3) and flat washer (Figure 1, Item 2) in flywheel housing at eight o'clock position. 2. Install new gasket (Figure 1, Item 1), oil filter adaptor (Figure 1, Item 7), four flat washers (Figure 1, Item 6), four new lockwashers (Figure 1, Item 5), and four screws (Figure 1, Item 4) on rear left side of cylinder block. Torque screws to 30–35 lb-ft (41–47 N·m). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0017 0017-2