TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 128 of 856
REMOVAL 1. Remove oil gauge rod (Figure 1, Item 6) from tube assembly (Figure 1, Item 4). 2. Unscrew tube assembly (Figure 1, Item 4) from adaptor (Figure 1, Item 5) in front right side of oil pan. 3. Remove locknut (Figure 1, Item 1), clip (Figure 1, Item 2), and tube assembly (Figure 1, Item 4) from right front exhaust manifold stud (Figure 1, Item 3). Replace locknut on stud. If necessary, remove clip from tube assembly. 4. Remove adaptor (Figure 1, Item 5) from oil pan. 6 4 3 5 2 1 MAINT_043 Figure 1. Oil Level Gauge Rod Removal and Installation (Models 5063-5393 and 5063-539L). END OF TASK INSTALLATION 1. Install adaptor (Figure 1, Item 5) in right side of oil pan. 2. If removed, install clip (Figure 1, Item 2) on tube assembly (Figure 1, Item 4). Loosely install tube assembly in adaptor (Figure 1, Item 5). 3. Remove locknut (Figure 1, Item 1) from right front exhaust manifold stud (Figure 1, Item 3). Discard locknut. Install clip (Figure 1, Item 2), tube assembly (Figure 1, Item 4), and new locknut (Figure 1, Item 1) onto exhaust manifold stud (Figure 1, Item 3). Securely tighten tube assembly to adaptor (Figure 1, Item 5). Torque locknut to 30–35 lb-ft (41–47 N·m). 4. Install oil gauge rod (Figure 1, Item 6) in tube assembly (Figure 1, Item 4). END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0016 0016-2