TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 115 of 856
INSTALLATION NOTE For models 5063-5393 and 5063-539L, water by-pass hose and two clamps will be installed in (WP 0011). 1. Slide hose (Figure 2, Item 2) and two clamps (Figure 2, Item 3) onto coolant pump (Figure 2, Item 8). 2. Position new coolant pump gasket (Figure 2, Item 13) to oil cooler (Figure 2, Item 14). NOTE For model 5063-5393, it will be necessary to install fuel line clamp under screw at front lower position when mounting coolant pump to oil cooler. 3. Install coolant pump (Figure 2, Item 8), four flat washers (Figure 2, Item 12), four new lockwashers (Figure 2, Item 11), four screws (Figure 2, Item 10), and socket head screw (Figure 2, Item 9) on oil cooler (Figure 2, Item 14). Torque socket head screw and four screws to 13–17 lb-ft (18–23 N·m). 3 2 3 8 9 10 11 12 13 14 MAINT_028 Figure 2. Coolant Pump Removal. TM 9-2815-205-24 0013 0013-3