TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 111 of 856
REMOVAL - Continued *2 3 4 8 10 12 11 13 9 14 15 **14 MODELS *5063-5393 **5063-539L MAINT_026A Figure 2. Fuel Injection Box and Lines Removal and Installation (2 of 2). END OF TASK INSTALLATION 1. Install two screws (Figure 2, Item 13), fuel junction block (Figure 2, Item 9), two new lockwashers (Figure 2, Item 11), and two nuts (Figure 2, Item 10) on bracket (Figure 2, Item 12). Torque screws to 30–35 lb-ft (41–47 N·m). NOTE Model 5063-539L has two plugs in junction block. 2. If removed, install plug (Figure 2, Item 14) in fuel junction block (Figure 2, Item 9). 3. Install tee fitting (Figure 2, Item 3) in top of fuel junction block (Figure 2, Item 9). NOTE Model 5063-539L has no elbow on top of junction block. 4. On model 5063-5393, install elbow (Figure 2, Item 2) in top of fuel junction block (Figure 2, Item 9) and elbow (Figure 2, Item 15) in side of junction block. 5. Install elbow (Figure 2, Item 4) in top of tee fitting (Figure 2, Item 3) and adaptor (Figure 2, Item 8) in side of tee fitting. 6. Connect fuel hose (Figure 1, Item 7) to adaptor (Figure 1, Item 8) on fuel junction block (Figure 1, Item 9) and to elbow (Figure 1, Item 6). Tighten hose connection. 7. Install transducer (Figure 1, Item 5) in elbow (Figure 1, Item 4) on fuel junction block (Figure 1, Item 9). 8. On model 5063-5393, connect fuel hose (Figure 1, Item 1) to elbow (Figure 1, Item 2) in fuel junction block (Figure 1, Item 9). Tighten hose connection. END OF TASK END OF WORK PACKAGE TM 9-2815-205-24 0012 0012-3/blank