TM-9-2815-205-24 Technical Manual for M113 Engine 6V53 6V53T Download
Page 105 of 856
ASSEMBLY NOTE Water outlet housing is installed on oil cooler end opposite oil drain plug with housing reservoir directly above oil inlet port. Two long bolts (Figure 6, Item 29) are installed in holes 90 degrees counterclockwise from oil inlet port. 1. Install new gasket (Figure 6, Item 37), transmission oil cooler water outlet housing (Figure 6, Item 1), two long bolts (Figure 6, Item 29), two new lockwashers (Figure 6, Item 30), and two flat washers (Figure 6, Item 31) in oil cooler (Figure 6, Item 38). Do not tighten bolts. 2. Install four short bolts (Figure 6, Item 34), four new lockwashers (Figure 6, Item 35), and four flat washers (Figure 6, Item 36), in transmission oil cooler. Torque bolts (Figure 6, Item 34) to 13–17 lb-ft (18–23 N·m). 3. If removed, install pipe plug (Figure 6, Item 32) and two pipe plugs (Figure 6, Item 33) in water outlet housing (Figure 6, Item 1). 1 31 30 29 32 33 36 35 34 37 38 MAINT_023 Figure 6. Transmission Oil Cooler Assembly. END OF TASK TM 9-2815-205-24 0011 0011-7