TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download
Page 94 of 288
TM 9-2540-207-14&P 5-50 Ignitor Holder (Continued) 5.7.4.3 Installation ! CAUTION ! Prior to re-installing the Ignitor Holder ensure that the threaded Ignitor Holder receptacle in the Burner Housing is fully aligned with the large holes in both the Burner Chamber and the Burner Cartridge. 1. Apply Nickel anti-seize (Loctite 77164) to the threads of the Ignitor Holder. 2. Using a 3/4" deep socket install the Ignitor Holder. DO NOT over tighten. 3. Install Ignitor. Ensure that the Ignitor is firmly installed into the Ignitor Holder. 4. Install the ignitor hatch, DO NOT over tighten (ref 5.7.4). 5.7.5 Burner Chamber (Applies to all Design Iterations) Figure 5.7-6 Burner Chamber Note: If the Ignitor has been removed, coat the threads with Nickel anti-seize (Loctite 77164) when installing.