TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download
Page 62 of 288
TM 9-2540-207-14&P 5-18 5.6.1.2 Vent Fan Assembly Repair Procedure For Design Iteration 3 Only. (Refer to Section 5.6.1.1 for Design Iterations 1 and 2) Figure 5.6-4 Vent Fan Assembly 5.6.1.2.1 Removal !CAUTION! When handling electronic circuits, personnel must be electrically grounded to avoid electrostatic damage to electronic components. During the following operations take care not to damage the electronic boards. Note: It is NOT necessary to remove the Dual Air Adapter for this operation. 1. Remove Top Shell (ref. 5.4.2). 2. Remove Bottom Shell (ref. 5.4.3). Note: Power Connector J11 is released by pressing the sides of the connector together with your fingers releasing the locking tabs, and gently pulling apart the two halves. J11 Power Connector J13 Logic Connector (to left of J11 Power Connector) Combustion Air Inlet Combustion Air Duct