TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download
Page 159 of 288
TM 9-2540-207-14&P 5-115 5.10.2 Fuel Injector Figure 5.10-4. Fuel Injector. 5.10.2.1 Removal 1. Remove vehicle power cable from the MS Power connector. 2. Remove Top Cover (ref. 5.4.1). 3. Rotate the Fuel Injector so that the wiring connector is facing upwards. 4. Remove the fuel injector J5 connector. Note: Use fingers to press the metal clip connector, and release TOWARDS the fuel injector. Gently detach connector from Fuel Injector. 5. Using an 8-32 hex socket remove the bolts from the side of the fuel manifold. 6. Lift the manifold and injector by gently pulling away from the top housing assembly. 7. The injector can now be removed. 5.10.2.2 Installation 1. Insert the Fuel Injector into the fuel boss of the Top Housing, and the other end of the Fuel Injector into the fuel manifold. The wiring connector of the Fuel Injector should be angled upwards and towards the fuel boss of the Burner Fan Plate Assembly. P5 Power Fuel Injector Connector