TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download
Page 148 of 288
TM 9-2540-207-14&P 5-104 Wiring Harnesses (continued) 21. Using pliers, re-set the Secondary Air Duct with the spring clamp to ensure that hose is NOT kinked or bent. 22. Use a 7/16" open ended wrench to attach the Exhaust Sensor. 23. Install Combustor Assembly (ref. 5.7.1). 24. Using a 7/16" open ended wrench, install Burner Sensor. Ensure that the wire is properly routed to prevent any damage. 25. Connect the Vent Sensor Connector (J5) of the Wiring Harness to the Vent Sensor connector. Ensure that the locking tab is engaged. 26. Install Vent Fan Assembly (ref. 5.6.1). 27. Install Bottom Shell (ref. 5.4.3). 28. Install Top Shell (ref. 5.4.2). 29. Install Top Cover (ref. 5.4.1).