TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download
Page 139 of 288
TM 9-2540-207-14&P 5-95 5.9.7 Fuel Injector 5.9.7.1 Fuel Injector Repair (Design Iteration 1 Only) Figure 5-27. Fuel Injector 5.9.7.1.1 Removal 1. Remove vehicle power cable from the MS Power connector. 2. Remove Top Cover (ref. 5.1.1). 3. Rotate the Fuel Injector so that the wiring connector is facing upwards. 4. Remove Power Fuel Injector connector (J5). Note: Use fingers to press the metal clip connector, and release TOWARDS the Fuel Injector. Gently detach connector from Fuel Injector. 5. Remove the two (2) fuel lines at the Burner Fan Plate fuel fittings. 6. Remove the Fuel Pump Assembly (ref. 5.9.3). 7. Using a #1 cross-tip screwdriver, unscrew the two (2) screws that hold the MS Power connector (J2) to the Top Housing, and push the connector into the Top Housing. 8. Free the Power Main Capacitor (C2) by loosening the bolt on the side of the Main Capacitor clamp. 9. Using a #2 cross-tip screwdriver, remove the eight (8) screws from the Burner Fan Plate Assembly. Free the Power Inductor (L1) from its clamp.