TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download
Page 138 of 288
TM 9-2540-207-14&P 5-94 12. Attach the Wiring Harness connector for the Burner Fan Driver Board (J3), ensuring the connector is properly engaged. 13. Using a 9/16" open ended wrench, connect the fuel supply to the heater. 14. Connect vehicle power cable to the heater MS Power connector (Control Box Connection). 15. Start the heater and check that there are NO fuel leaks from the fuel connections (ref. Figure 5.5-9). 16. Install Top Cover (ref. 5.4.1). Figure 5-26. Fuel Leak Check Points