Sign up to sell your inventory with NSN Lookup

TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download

Page 122 of 288

TM 9-2540-207-14&P 5-78 Diagnostic Display (continued) 2. Install Connector (J8) from the Wiring Harness to the Diagnostic Display Board. 3. Apply Loctite 243 (blue) to each of the four (4) screws. 4. Install one (1) star washer and one (1) screw on each post and tighten with a #2 cross- tip screwdriver. DO NOT OVER TIGHTEN. 5. Install Top Cover (ref. 5.4.1). Figure 5-12. Diagnostic Display Board Details Connector Connector