TM-9-2540-207-14&P Sustainment Manual for A20 Heater for M113 2540-01-396-2826 Download
Page 111 of 288
TM 9-2540-207-14&P 5-67 / 5-68 blank 5.8.4 Vent Outlet Seal (Applies to all Design Iterations) Figure 5.8-6 Vent Outlet Seal Note: The Vent Outlet Seal MUST be replaced EVERY time the heater is re- installed into a vent ducting system. 5.8.4.1 Removal 1. Pull Vent Outlet Seal from Vent Outlet End of heater. 5.8.4.2 Installation 1. Position new Vent Outlet Seal over Vent Outlet end of heater so the foam side is out, and positioning notches on sides line up with notches in Vent Sensor. 2. Press Vent Outlet Seal over end of heater until the seal stops against the ends of the Top and Bottom Shells.