TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 96 of 620
TM 9-2520-272-40 0014 REMOVE WIRING HARNESS ASSEMBLY NOTE Wiring harness can be removed without removal of solenoids or control valve assemblies. Wiring harness does not have to be removed to remove control valve assemblies. Transmission is upright on f oor or work table. 1. Clean wiring harness connector body (Figure 1, Item 5) and transmission area around connector using a clean, lint-free cloth and cleaning compound. 2. Remove four screws (Figure 1, Item 6) that attach wiring harness connector body (Figure 1, Item 5) to transmission. Discard screws (Figure 1, Item 6). 3. Disconnect seven plastic connectors (Figure 1, Item 7) that attach wiring harness (Figure 1, Item 9) to solenoids (Figure 1, Item 8). 4. Remove bolt (Figure 1, Item 2) and washer (Figure 1, Item 3) that attach harness ground connector (Figure 1, Item 4) to main control valve assembly (Figure 1, Item 1). Figure 1. Wiring Harness Connector Body Removal. 0014‐2