TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 88 of 620
TM 9-2520-272-40 0012 REMOVE PRIORITY VALVE ASSEMBLY NOTE Wiring harness does not have to be removed to remove priority valve assembly. Transmission is upright on f oor or work table. 1. Remove two 1/4-18 x 2-1/8 inch bolts (Figure 1, Item 1) and two washers (Figure 1, Item 2) that attach priority valve assembly (Figure 1, Item 5) to separator plate (Figure 1, Item 4). 2. Remove 1/4-18 x 1-3/4 inch bolt (Figure 1, Item 3) and washer (Figure 1, Item 2) that attach priority valve assembly (Figure 1, Item 5) to separator plate (Figure 1, Item 4). 3. Remove priority valve assembly (Figure 1, Item 5). Figure 1. Priority Valve Assembly Removal. END OF TASK 0012‐2