TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 576 of 620
TM 9-2520-272-40 0072 REMOVE PUSH ROD COMPONENTS WARNING Spring-loaded parts can f y and injure you. Push rod components are spring loaded and must be restrained when spring pins are removed and installed. CAUTION When removing spring pins, be careful not to cut spring pins. 1. Tap two pins (Figure 1, Item 2) f ush with push rod (Figure 1, Item 3). 2. Remove two pins (Figure 1, Item 2). 3. Pull linear actuator cap (Figure 1, Item 1) from headless straight pin (push rod) (Figure 1, Item 3). 4. Push from inside of top cover to remove push rod (Figure 1, Item 3) and extension (Figure 1, Item 5) through cover. 5. Remove extension (Figure 1, Item 5) from push rod (Figure 1, Item 3). 6. Remove spring (Figure 1, Item 4). Figure 1. Push Rod Components Removal. 0072‐2