TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 570 of 620
TM 9-2520-272-40 0070 2. Strip 1/4 in. (6 mm) of insulation from end of lead (Figure 5, Item 10). 3. Put new terminal (Figure 5, Item 8) and (Figure 5, Item 11) on stripped end of lead (Figure 5, Item 10) and (Figure 6, Item 10). Bend tabs (Figure 6, Item 14) of terminal (Figure 5, Item 8) and (Figure 5, Item 11) around insulation and bend tabs (Figure 6, Item 15) around wire of lead (Figure 6, Item 10). Bend tangs (Figure 6, Item 16) slightly away from terminal (Figure 5, Item 9). END OF TASK INSTALL TERMINAL 1. Line up slot (Figure 5, Item 12) on terminal (Figure 5, Item 8) with key (Figure 5, Item 13) in new insulator (Figure 5, Item 8). Push insulator (Figure 5, Item 8) onto terminal (Figure 5, Item 9) until tangs lock into place. Figure 5. Terminal and Insulator. 0070‐6