TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 566 of 620
TM 9-2520-272-40 0070 REMOVE SOLENOIDS CAUTION Do not remove solenoids from valve assemblies while valve assemblies are installed on the transmission. Bolts can drop through oil return holes into the transmission, damaging the transmission. Bolt must be retrieved, even if transmission has to be disassembled. NOTE Do not remove solenoids unless replacement is necessary. For solenoid A, one bolt is 1/4 inch longer than the other bolts. This is to allow for the thickness of spring retainer. 1. Remove two bolts (Figure 1, Item 6) and (Figure 2, Item 6) from any of four solenoids (Figure 1, Item 1) on main valve body assembly (Figure 1, Item 5), or remove two bolts (Figure 1, Item 6) and (Figure 2, Item 6) from solenoid A (Figure 1, Item 2) on the main valve body assembly (Figure 1, Item 5). 2. Remove two bolts (Figure 1, Item 6) and (Figure 2, Item 6) from any of two solenoids (Figure 2, Item 1) on lockup valve body assembly (Figure 2, Item 7). 3. For solenoid A (Figure 1, Item 2), remove spring retainer (Figure 1, Item 3). 4. Remove any of the seven solenoids (Figure 1, Item 1), if necessary. Figure 1. Solenoids on Main Valve Body Assembly. 0070‐2