TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 56 of 620
TM 9-2520-272-40 0003 Suggested Order of Disassembly and Assembly of the Major Assemblies of X200-4A Transmission The following list is the suggested order for the transmission’s disassembly into and assembly from major assemblies. Note that assembly is in reverse order from disassembly. Remove Transmission Top Components Install Transmission on Maintenance Stand Remove Right Cover Assembly Remove Left Cover Assembly Remove Converter Element Components Remove Input Housing Assembly Remove Bevel Gear Assembly Remove Hydrostatic Pump and Motor Assembly Install Hydrostatic Pump and Motor Assembly Install Bevel Gear Assembly Install Input Housing Assembly Install Converter Element Components Install Left Cover Assembly Install Right Cover Assembly Remove Transmission from Maintenance Stand Install Transmission Top Components USABLE ON CODE If multiple models were present in the Repair Parts and Special Tools List (RPSTL), the X200-4A Transmission would be identif ed by a Usable On Code (UOC). X4A is the UOC for the X200-4A Transmission. In each RPSTL f gure that contains multiple UOCs, under (6) Description and Usable on Codes (UOC), you will f nd the UOC for the part, if applicable. If no UOC is listed, the part will be used in all models and all UOCs covered in that RPSTL. END OF WORK PACKAGE 0003‐2