TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 544 of 620
TM 9-2520-272-40 0069 INSTALL TRANSMISSION ON ADAPTER PLATE WARNING Check slings and trestle for cuts, breaks, or wear before and during hoisting. Slings and trestle can break and cause injury or death. Transmission will tilt suddenly when weight shifts from one sling to the other. Stay clear of slings and transmission to avoid injury. Transmission weighs about 975 lb (442 kg). To avoid injury or death, keep out from under and clear of transmission at all times. Do not let transmission swing freely during hoisting. NOTE An adapter plate must be mounted on the maintenance turnover stand in order to accept the transmission. The transmission must be mounted on the adapter plate. If lifting brackets must be reinstalled on transmission, proceed to Step 1. If lifting brackets have not been removed from transmission, go to Step 2. 1. Install lifting brackets. Refer to TM 9-2350-277-13&P. 2. Make sure right lifting bracket (Figure 1, Item 2) is securely attached to right cover assembly (Figure 1, Item 1) and left lifting bracket (Figure 1, Item 3) is securely attached to left cover assembly (Figure 1, Item 4). Figure 1. Right and Left Lifting Brackets with Attaching Hardware. 0069‐2