TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 538 of 620
TM 9-2520-272-40 0067 COMMON TOOLS CAUTION Use heat guns to heat parts for disassembly or assembly of close f t parts. To prevent damage, do not use open f ame to heat any parts in this transmission. 1. For authorized common tools and equipment, refer to the Modif ed Table of Organization and Equipment (MTOE) for the maintenance activity. 2. All required tools and equipment must be available within the maintenance shop before repair of a transmission is started. The use of improper tools and equipment may damage parts and may result in unsatisfactory performance or failure of the transmission after repairs are completed. END OF TASK SPECIAL AND FABRICATED TOOLS Special tools are listed in WP 0075 of this manual and illustrated in TM 9-2520-272-40P. Fabricated tools are listed and illustrated in WP 0075 of this manual. END OF TASK OIL ANALYSIS PROGRAM FOR TRANSMISSION Refer to the appropriate Lubrication Order LO 9-2350-277-13 (M113) for oil changes and to DA PAM 738-750 (Oil Analysis Program User’s Guide) for oil sampling procedures. END OF TASK SUPPLEMENTAL MAINTENANCE INSTRUCTIONS Many maintenance procedures have been standardized and printed in U.S. Army publications. The following publications supplement the maintenance instructions in this manual: Table 2. Supplemental Maintenance Publication References. DA PAM 738-750 Functional User’s Manual for The Army Maintenance Management System (TAMMS) FM 38-700 Packaging of Material - Preservation FM 38-701 Packaging of Material - Packing TM 9-214 Inspection, Care, and Maintenance of Antifriction Bearings TM 9-243 Use and Care of Hand Tools and Measuring Tools END OF TASK END OF WORK PACKAGE 0067‐10