TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 529 of 620
TM 9-2520-272-40 0067 SUSTAINMENT MAINTENANCE GENERAL MAINTENANCE INFORMATION INITIAL SETUP: Tools and Special Tools Heater, Gun-Type, Electric (WP 0079, Item 20) Tool Kit, General Mechanic’s (GMTK) (WP 0079, Item 45) Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft (WP 0079, Item 51) Materials/Parts Cloth, Abrasive, Crocus (WP 0078, Item 6) Cloth, Batiste, Lint-Free, White (WP 0078, Item 7) Gloves, Leather (WP 0078, Item 8) Grease, High-Temperature (WP 0078, Item 9) Lubricating Oil, Engine (WP 0078, Item 10) Petrolatum, Technical (Petroleum Jelly) (WP 0078, Item 12) Rag, Wiping (WP 0078, Item 13) Sealing Compound, Gasket (WP 0078, Item 14) Sodium Phosphate, Tribasic Anhydrous (WP 0078, Item 17) Solvent, Cleaning (WP 0078, Item 18) Personnel Required Track Vehicle Repairer, 91H10 References DA PAM 738-750 FM 38-700 FM 38-701 LO 9-2350-277-13 TM 9-214 TM 9-243 TM 9-2520-272-40P WP 0075 SCOPE This work package provides general maintenance practices that must be followed when working on the transmission. This work package is provided to eliminate the need to repeat common maintenance practices throughout this manual. OVERVIEW Follow the maintenance practices in this work package when working on the transmission. The maintenance procedures in this manual cover normal maintenance situations. You may f nd a situation where the procedure will not work because of contamination, overheating, or excessive wear. For example, a bearing may have to be pressed out instead of lifted out as instructed in the procedure. When a maintenance practice or procedure does not seem to be working for you, talk to your maintenance off cer before trying any other method of doing the task. A bad method could damage good parts or cause unnecessary damage to the transmission. 0067‐1