TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 526 of 620
TM 9-2520-272-40 0066 ADJUST RIGHT BRAKE NOTE Brake needs tightening if indicator passes APPLY mark when 40 lb-ft (54 N·m) is applied with torque wrench. Brake needs loosening if indicator does not get to APPLY mark when 40 lb-ft (54 N·m) is applied with torque wrench. Brake adjusting link should be turned only 1/16 turn (60 degrees) at a time until proper brake adjustment is achieved. Prior to removal of right brake adjusting cover, note location of chain in relation to bolt. 1. Remove six bolts (Figure 1, Item 1) and six washers (Figure 1, Item 2) that secure the right brake adjusting cover (Figure 1, Item 3). 2. Remove right brake adjusting cover (Figure 1, Item 3) and gasket (Figure 1, Item 4). Discard gasket (Figure 1, Item 4). Figure 1. Right Brake Adjusting Cover Removal. 0066‐2