Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download

Page 514 of 620

TM 9-2520-272-40 0063 CHECK OUTPUT SHAFT DRAG, LEFT AND RIGHT SIDE 1. Straighten bent tab of washer (Figure 1, Item 1) that retains bolt (Figure 1, Item 3) on output f ange (Figure 1, Item 1), if necessary. 2. Turn output f ange (Figure 1, Item 1) to right (clockwise) using torque wrench on bolt (Figure 1, Item 3). Torque while turning should not exceed 20 lb-ft (27 N·m). 3. Punch dimple in washer (Figure 1, Item 4) if dimple is not present. Dimple must go down into dimple hole (Figure 1, Item 2) in left and right output f anges (Figure 1, Item 1). Figure 1. Dimpled Washer on Output Flange. 0063‐2