TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 509 of 620
TM 9-2520-272-40 0061 INSTALL GOVERNOR DRIVE GEAR,GOVERNOR BODY ASSEMBLY, AND GOVERNOR ASSEMBLY NOTE Transmission is on maintenance stand, right side up. 1. Install governor drive gear (Figure 3, Item 8) onto range output shaft (Figure 3, Item 12). 2. Install retaining ring (Figure 3, Item 7) into groove of range output shaft (Figure 3, Item 12). 3. Install governor body assembly (Figure 3, Item 9). 4. Install three washers (Figure 3, Item 11) and bolts (Figure 3, Item 10) to retain governor body assembly (Figure 3, Item 9). 5. Torque three bolts (Figure 3, Item 10) to 36 to 43 lb-ft (49 to 68 N·m). Figure 3. Governor Drive Gear and Governor Body Assembly Installation. 0061‐3