TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 507 of 620
TM 9-2520-272-40 0061 SUSTAINMENT MAINTENANCE REPLACE GOVERNOR ASSEMBLY, GOVERNOR BODY ASSEMBLY, AND GOVERNOR DRIVE GEAR INITIAL SETUP: Tools and Special Tools Pliers Set, Retaining Ring (WP 0079, Item 27) Socket, Socket Wrench, 3/8” Drive, 6-Point, Regular, 1/2” (WP 0079, Item 37) Stand, Maintenance, Automotive (WP 0079, Item 40) Tool Kit, General Mechanic’s (GMTK) (WP 0079, Item 45) Wrench, Torque, Ratcheting, 1/2” Drive, 250 lb-ft (WP 0079, Item 51) Materials/Parts Gasket (WP 0080, Item 29) Personnel Required Track Vehicle Repairer, 91H10 Equipment Condition Transmission removed from vehicle or container (TM 9-2350-277-13&P) Oil f ll tube assembly removed (WP 0006) Right cover assembly removed (WP 0016) REMOVE GOVERNOR ASSEMBLY,GOVERNOR BODY ASSEMBLY, AND GOVERNOR DRIVE GEAR NOTE Transmission is on maintenance stand, right end up. 1. Remove four bolts (Figure 1, Item 6) and four washers (Figure 1, Item 5) that retain access cover (Figure 1, Item 4) to center housing (Figure 1, Item 1). 2. Remove access cover (Figure 1, Item 4) and gasket (Figure 1, Item 3). Discard gasket (Figure 1, Item 3). 3. Turn governor assembly (Figure 1, Item 2) slightly to the left (counter clockwise) and pull it from center housing (Figure 1, Item 1). Figure 1. Governor Access Cover and Governor Assembly Removal. 0061‐1