TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 504 of 620
TM 9-2520-272-40 0060 6. Install S-chain hook (Figure 8, Item 8) in eyebolt (Figure 8, Item 2) and attach sling (Figure 8, Item 7). Hoist hydrostat (Figure 8, Item 6) over hydrostat bore in center housing (Figure 8, Item 13) using hoist and trestle. NOTE Center housing is cut away to receive the raised part of the hydrostat housing where the steer control assembly will be installed. 7. Turn hydrostat (Figure 9, Item 6) so that platform (Figure 9, Item 15) for steer control assembly lines up with recess (Figure 9, Item 14) in center housing (Figure 9, Item 13). Lower hydrostat into transmission, aligning gear at base of hydrostat with gear in center housing. Figure 8. Hoisting Hydrostatic. Figure 9. Hydrostat Aligned on Center Housing. 0060‐6