TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 497 of 620
TM 9-2520-272-40 0059 39.Install input oil pump driven gear (Figure 24, Item 1) over input oil pump shaft (Figure 24, Item 10) and woodruff key (Figure 23, Item 11). 40.Put screwdriver (Figure 24, Item 3) between input oil pump driven gear (Figure 24, Item 1) and input oil pump drive gear (Figure 24, Item 2) to stop gears from turning. 41.Install new nut (Figure 24, Item 4) that keeps input oil pump driven gear (Figure 24, Item 1) in position. Do a check of prevailing torque by measuring the torque required to turn nut (Figure 24, Item 4). Record the prevailing torque. 42.Torque nut (Figure 24, Item 4) to 30 lb-ft (40 N·m) plus prevailing torque. Figure 24. Input Oil Driven Gear Installation. END OF TASK END OF WORK PACKAGE 0059-17/18 blank