TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 491 of 620
TM 9-2520-272-40 0059 3. Install diaphragm assembly (Figure 14, Item 40) onto shaft (Figure 14, Item 42). 4. Install nine bolts (Figure 14, Item 38) and nine washers (Figure 14, Item 39) that keep diaphragm assembly (Figure 14, Item 40) in position. 5. Torque nine bolts (Figure 14, Item 38) to 36 to 43 lb-ft (49 to 58 N·m). 6. Install new packing (Figure 14, Item 41) onto sleeve of diaphragm assembly (Figure 14, Item 40). Figure 14. Diaphragm Assembly Installation. 7. Put bevel gear assembly, shaft down, on wooden blocks as shown in Figure 15. 8. Install input and scavenge pump assembly (Figure 15, Item 31). Install two bolts (Figure 15, Item 36) and two washers (Figure 15, Item 37) that keep input and scavenge pump assembly (Figure 15, Item 31) in position. 9. Torque two bolts (Figure 15, Item 36) to 17 to 20 lb-ft (23 to 27 N·m). Figure 15. Input and Scavenge Pump Assembly Installation. 0059‐11