TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 490 of 620
TM 9-2520-272-40 0059 34.Remove two metal seal rings (Figure 12, Item 44) from shaft (Figure 12, Item 43). Discard two seal rings (Figure 12, Item 44). Figure 12. Seal Rings Removal. END OF TASK ASSEMBLE BEVEL GEAR ASSEMBLY, EXTERIOR COMPONENTS 1. Put bevel gear assembly, shaft upward, on wooden blocks as shown in Figure 13. 2. Install two new metal seal rings (Figure 13, Item 44) onto shaft (Figure 13, Item 43). Apply petrolatum to seal rings (Figure 13, Item 44). Figure 13. Seal Rings Installation. 0059‐10