TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 481 of 620
TM 9-2520-272-40 0059 SUSTAINMENT MAINTENANCE REPAIR BEVEL GEAR ASSEMBLY INITIAL SETUP: Tools and Special Tools Adapter, Socket Wrench Drive, 3/8” Male x 1/2” Female (WP 0079, Item 2) Crowfoot Attachment, Flare Nut, 3/8” Drive, 9/16” (WP 0079, Item 11) Extension, 3/8” Drive, 6” (WP 0079, Item 16) Hammer, Hand, Soft-Face, Dead Blow, 52 oz (WP 0079, Item 19) Pliers Set, Retaining Ring (WP 0079, Item 27) Press, Arbor, Hand, 25 Ton (WP 0079, Item 28) Socket Wrench, Universal, 3/8” Drive, 6-Point, 9/16” (WP 0079, Item 39) Tool Kit, General Mechanic’s (GMTK) (WP 0079, Item 45) Materials/Parts Block, Wood, Lumber, Soft Wood (WP 0078, Item 3) (2 - 16 in. lengths) Nut, Self-Locking, Hex (WP 0080, Item 24) O-Ring (WP 0080, Item 42) (2) Packing, Preformed (WP 0080, Item 40) Petrolatum, Technical (Petroleum Jelly) (WP 0078, Item 12) Rag, Wiping (WP 0078, Item 13) Seal Ring, Metal (WP 0080, Item 14) (2) Personnel Required Track Vehicle Repairer, 91H10 Equipment Condition Transmission removed from vehicle or container (TM 9-2350-277-13&P) Oil f ll tube assembly removed (WP 0006) Input housing assembly removed (WP 0042) NOTE The bevel gear assembly does not have to be removed from the transmission to remove exterior components. However, text and illustrations in this work package are based upon the bevel gear assembly removed from the transmission. 0059‐1