Sign up to sell your inventory with NSN Lookup

TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download

Page 478 of 620

TM 9-2520-272-40 0058 INSTALL BEVEL GEAR ASSEMBLY NOTE The center housing assembly may have been removed from the maintenance stand adapter or may still be attached to the maintenance stand adapter depending upon previous maintenance actions. If center housing assembly has been removed from the maintenance stand adapter, refer to WP 0068 to install the transmission on the maintenance stand adapter. Transmission center housing assembly is on maintenance stand, with input side turned up. 1. Attach three 7/16-14 x 1-1/4 bolts (Figure 3, Item 1) and three 7/16 inch washers (Figure 3, Item 2) through lugs (Figure 3, Item 6) of multiple-leg sling and into three bolt holes (Figure 3, Item 3) in bevel gear assembly (Figure 3, Item 5). Figure 3. Bevel Gear Assembly with Multiple-Leg Sling Attached. 0058‐4