TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 476 of 620
TM 9-2520-272-40 0058 REMOVE BEVEL GEAR ASSEMBLY WARNING Do a check of slings and trestle for cuts, breaks, or wear before and during lifting transmissions. Slings and trestle can break and cause injury or death. Bevel gear assembly must be lifted using sling, hoist, and trestle. To avoid injury, keep clear of bevel gear assembly at all times. Do not let bevel gear assembly swing freely during lifting. 1. Attach three 7/16-14 x 1-1/4 inch bolts (Figure 1, Item 1) and three 7/16 inch washers (Figure 1, Item 2) until snug through lugs (Figure 1, Item 6) of multiple-leg sling and into holes (Figure 1, Item 3) in bevel gear assembly (Figure 1, Item 5). 2. Use a multiple-leg sling to lift bevel gear assembly (Figure 1, Item 5) out of transmission center housing assembly (Figure 1, Item 4). Figure 1. Bevel Gear Assembly Removal. 0058‐2