TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 474 of 620
TM 9-2520-272-40 0057 INSTALL IDLER GEAR ASSEMBLY NOTE Transmission is on maintenance stand, left end up. 1. Install hydrostatic pump idler gear (Figure 4, Item 7) into center housing (Figure 4, Item 4). 2. Install bearing retaining plate (Figure 5, Item 3) into center housing (Figure 5, Item 4). 3. Install six washers (Figure 5, Item 2) and bolts (Figure 5, Item 2) to attach bearing retaining plate (Figure 5, Item 3) to center housing (Figure 5, Item 4). 4. Torque six bolts (Figure 5, Item 1) to 36-43 lb-ft (49-68 N·m). Figure 4. Hydrostatic Pump Idler Gear Installation. Figure 5. Bearing Retaining Plate Installation. END OF TASK END OF WORK PACKAGE 0057‐4