TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 468 of 620
TM 9-2520-272-40 0056 44.Soak three friction plates (Figure 32, Item 57) in lubricating oil for two minutes prior to assembly. Install one reaction plate (Figure 32, Item 58), then one friction plate (Figure 32, Item 57). 45.Repeat Step 44 until all four reaction plates (Figure 32, Item 58) and all three friction plates (Figure 32, Item 57) are installed. Figure 32. Third Clutch Pack Installation. 46.Apply petrolatum to backing plate pin (Figure 33, Item 14). Install pin backing plate pin (Figure 33, Item 14) into slot in clutch plate (third clutch backing plate) (Figure 33, Item 16). 47.Install clutch backing plate (Figure 33, Item 16). Tap clutch backing plate (Figure 33, Item 16) and pin (Figure 33, Item 14) and make sure pin (Figure 33, Item 14) is installed in slot in range bore of center housing. 48.Install retaining ring (Figure 33, Item 15) that holds clutch backing plate (Figure 33, Item 16). Figure 33. Third Clutch Backing Plate and Pin Installation. 0056‐26