TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 466 of 620
TM 9-2520-272-40 0056 38.Use a black tube-type marker to mark edge of third clutch piston housing assembly (Figure 30, Item 21) above bolt hole. 39.Install third clutch piston housing assembly (Figure 30, Item 21), aligning bolt hole in piston housing assembly (Figure 30, Item 21) with bolt hole in center housing. 40.Install washer (Figure 30, Item 18) and bolt (Figure 30, Item 19) through center housing and into piston housing assembly (Figure 30, Item 21) f nger tight. 41.Use thickness gage to measure space between piston housing assembly (Figure 31, Item 21) and top of retaining ring groove in range pack bore of center housing. Use Table 2 for the selection of retaining ring (Figure 31, Item 20). Table 2. Retaining Ring Selection. For Measured Distance Select Ring 0.149 to 0.152 in. (3.79 to 3.88 mm) 6884274 0.153 to 0.155 in. (3.89 to 3.96 mm) 6884273 0.156 to 0.158 in. (3.97 to 4.03 mm) 6884275 0.159 to 0.161 in. (4.04 to 4.08 mm) 6884276 0056‐24