TM-9-2520-272-40 Direct Support for M113A3 X200-4A Transmission 2520-01-397-1074 Download
Page 463 of 620
TM 9-2520-272-40 0056 29.Use a thickness gage to measure the space between second clutch piston housing assembly (Figure 27, Item 29) and top of retaining ring groove in range pack bore of center housing. Use Table 1 for the selection of retaining ring (Figure 27, Item 22). Table 1. Retaining Ring Selection. For Measured Distance Select Ring 0.149 to 0.152 in. (3.79 to 3.88 mm) 6884274 0.153 to 0.155 in. (3.89 to 3.96 mm) 6884273 0.156 to 0.158 in. (3.97 to 4.03 mm) 6884275 0.159 to 0.161 in. (4.04 to 4.08 mm) 6884276 30.Install selected retaining ring (Figure 27, Item 22). Figure 27. Retaining Ring Selection and Installation. 0056‐21